Suspension Tuning

Factory level suspension service, tuning, and support backed by the largest OEM WP inventory and real race tuning experience. Solid Performance helps riders get more comfort, control, and confidence out of their bike.

Suspension Services

Getting a customized set of suspension? Thinking about pulling the trigger on a set of Pro Components? Sending your OEM components for service? No matter your needs, SOLID has you covered. Please fill out our rider information suspension form so the tuners can give you a call to discuss the build. Always feel free to call with any questions. 

We're glad to help.
We are riders and racers just like you!

My Garage

Build your garage to request suspension services

Custom Suspension Options

Ready for a custom option? Our expert technicians offer a wide variety of products and services

  • AER Cone Valve Adaptation

    Add the infamous Cone Valve mid-valve from the AER Cone Valve forks to your OEM AER fork! This greatly reduces deflection, increases bump absorption, and provides a smoother more consistent mid-stroke.

  • Open Chamber Symmetrical Kit 

    Converts the asymmetrical Xplor fork to a traditional symmetrical design.  This allows tuners to more precisely dial your internal setting and gives your external clickers more effect!

  • Adventure Open Chamber Symmetrical Kit

    Converts the 790/890 Adventure R and Norden Expedition asymmetrical Xplor fork to a traditional symmetrical design. This allows tuners to more precisely dial your internal setting and gives your external clickers more effect!

  • External Finger Clickers

    Adds the no tool requiredconvenienceto the Cone Valve and cartridge kit fork caps

  • Carbon Spring Tubes

    Upgraded carbon spring tubes help to ease the transition into the hydro stop of the Cone Valve fork and 6500 Cartridge Kit. They give better bottoming resistance as well as more comfort at high shaft velocity.

  • Thrust Bearing

    Adds compliance on “trail trash”, i.e. little roots/rocks

  • Xtrig Preload Adjuster

    Not only simplifies adjusting preload/sag but also makes it more fine tune-able (24:1 adjustment) 

  • WP 6500 Cartridge Kits

    The new standard in suspension performance. Symmetrical Closed Cartridges with massive hydro stops and external preload adjusters.

  • WP Pro Components

    The highest level of performance in a complete package that you can take from bike to bike. 

Launch your suspension garage, build your bike profile, and tell us your suspension goals.

 

Start Now

About Solid

Solid Performance brings together OEM parts access, race-informed suspension tuning, and hands-on technical support for KTM, GasGas, Husqvarna, and WP riders.

Authorized WP Suspension Center

Service, tuning, and technical support for KTM, Husqvarna, and GasGas riders.

Built by Riders & Racers

Real-world recommendations shaped by testing, racer feedback, and shop experience.

OEM Parts + Pro Components

Shop SpareParts, PowerParts, WP upgrades, and performance essentials in one place.

Expert Fitment Support

Not sure what fits? Get help from a team that works on these bikes every day.

More about us

What customers are saying..

  • I’ve been using Solid Performance for years. I was recommended to this shop by a professional rider that trusts them, and have been blown away by their customer support, knowledge and high standards...

    Conor Sheridan

  • This is the only shop I trust with any rebuild or upgrade that I need for my bikes. The team here is professional and highly skilled in what they do and they have earned my confidence. I've never have a better experience than at SP, and wouldn't want to go anywhere else. Great Team of Guys!

    David Porter

  • Best place I ever had my bike serviced they take the time to go over my bike above and beyond. My first ride after upgrading my suspension was amazing. It felt like a whole different bike. I’ll never take my bike anywhere else.

    Ambler Fireplace
    Owner

  • The knowledge and professionalism in this organization is top notch. The made sure they took the time to figure out what I wanted from my bike and made the appropriate changes. They took the time on delivery to walk me thru what to do with the bike and how to make my own adjustments and even followed up a few days later to see how everything was going. Top Notch Folks.

    Greg Condon

  • Alex and Evan helped me out at the Landers KTM rally this past weekend. Swapped out the correct spring on my 1290 SAR and set the suspension up. They have a wealth of knowledge and are super motivated in their craft. They will be doing my suspensions from this point forward. Thanks guys.

    Sam Ulberg

  • Converted my ‘24 350SXF suspension to a woods setup. These guys are on the ball and you can tell they actually care by the amount of questions they ask. Full revalve forks & shock with shipping tax and everything under $1k. I’ve found my suspension guys no doubt.

    Jesse LaJoie
    Missouri

Servicing

What suspension services do you offer?

We offer fork rebuilds, fork oil changes, fork re-valves, fork tube polishing, shock rebuilds, shock oil changes, shock re-valves, suspension lowering, and WP suspension service.

Are you an authorized WP Suspension service center?

Yes. Solid Performance is an authorized WP Suspension service center, supporting WP suspension service, setup, tuning, and performance upgrades for KTM, Husqvarna, and GasGas riders.

Do you offer custom solutions?

Yes. Suspension is not one-size-fits-all. Solid Performance builds custom suspension solutions based on your bike, weight, skill level, terrain, and riding goals. From rebuilds and re-valves to lowering, WP upgrades, Pro Components, and complete setup packages, our suspension team can help you get the bike working the way it should.

Start by visiting garage.sp-wp.com. Build your bike in the Suspension Garage, choose the parts or services you are interested in, and submit an order request for our team to review.

Services

What is the difference between a rebuild and a re-valve?

A rebuild refreshes worn service items and fluids. A re-valve changes the internal suspension setup to better match your weight, skill level, terrain, and riding style.

Can you lower my suspension?

Yes. We offer suspension lowering for riders who need a lower seat height, better comfort, or a setup tailored to specific riding needs.

Do you work on WP Pro Components?

Yes. We service and support WP suspension components, including performance upgrades and Pro Component setups for riders looking for a more dialed-in suspension package.

Custom Suspension

How do I get started with custom suspension?

Start by visiting the Solid Performance Suspension Garage at garage.sp-wp.com. Build your bike, choose the suspension parts or services you are interested in, and submit an order request.

Once your request comes through, our suspension team can review your bike, rider details, terrain, and goals to help recommend the right setup. Whether you are looking for a basic refresh, a re-valve, lowering, WP upgrades, Pro Components, or a fully custom suspension package, the Garage gives us the information we need to point you in the right direction.

Still can't see it? Get in touch.

Starting a project? Let's talk.

Get in touch

Driven to keep you on the road

OEM WP Parts

Solid Performance has the largest WP inventory in the industry.

WP Parts Finder